Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Cal 29 2gm20 repower


Newbie

Status: Offline
Posts: 2
Date:
Cal 29 2gm20 repower


Hi Stanley,
 Would a 14hp Beta be a straight crossover from my 2gm20 in my CAl 29?
Where would I get one in California-San Diego?
Approx purchase and install?

                                              Thanks Steve

__________________
SJW


Guru

Status: Offline
Posts: 958
Date:

Hello Steve,

The Beta 14 is a great fit in the Cal 2-29 and is available on the same mount centers as the Yanmar so this should be an easy repower. I repowered one myself in 1999 and we were all surprised at how well the boat went. When you opened the throttle the boat almost immediately tried to climb out of the water. This engine replaced a Farymann. You should get much better performance that you did with the Yanmar because, with the correct transmission ratio (2:1) you can prop the boat correctly. I have run a prop calc for you and you will want a 12"x8" three blade RH propeller

Contact Phil Jones in San Diego on (619) 226-2064. He will be able to fill you in with pricing and labor costs etc.

Regards, Stanley




__________________


Newbie

Status: Offline
Posts: 2
Date:

Thank You Stanley.
Sounds like alot of fun. Maybe you could tell me if a 16HP would be your personal choice?

Steve

__________________
SJW


Guru

Status: Offline
Posts: 958
Date:

Hello Steve,

I think that the 14 is all that you need. The Cal 2-29 is a fairly light boat with a very easily driven hull. Any more HP will be a waste of your money as the boat wont go any faster.

I would use the Beta 14 and the money saved will pay for the correct 3 blade propeller.

Regards, Stanley

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard