Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Panel buzz


Newbie

Status: Offline
Posts: 1
Date:
Panel buzz


new Beta 25 last spring. Panel buzzed until ran ground from panel to battery. This spring new depth gauge and speed gauge, both wired to independent terminal on fuse panel. When turned on, panel buzzes faintly. When engine running and gauges on, panel buzzes faintly. engine running with key turned to off, gauges do not work. Yard installed engine. Did they cross up something in wiring?



__________________


Senior Member

Status: Offline
Posts: 198
Date:

It sounds like the panel was not grounding through the harness. There is a good chance that the ground wire was damaged at the lower alternator bolt which is used as a ground point.

Do not run the engine with the key turned to off. Switching the key on and off with the engine running will damage the alternator diodes.

Was the cable removed from between alternator and starter motor?

__________________

Best regards,

Farron

Technical Sales and Service for Beta Marine, US Ltd. Minnesott Beach, NC   PH: 252-249-2473  farron@betamarineusa.com

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard