|
Fitting an external regulator
(Preview)
We often get asked how to fit an external regulator to our engines. There are many differant makes and types. Some , like the Adverc controller just need a sense wire from the alternator, others like the Balmar need the internal regulator removed and replacing by a brush box. Here is a well put together...
|
Stanley
|
0
|
1240
|
|
|
|
|
Overheating
(Preview)
I have the BD 1005 28 hp. The engine has been running hot, but not overheating, so I had a mechanic clean the heat exchanger out. When I ran the boat this weekend under normal conditions it overheated. I still have good raw water flow and the impeller is in good condition. Could an air lock in the clo...
|
garrick martin
|
7
|
7895
|
|
|
|
|
Repowering my Albin Alpha 29
(Preview)
Hello, I have installed a new Beta 14, 2.6:1 gearbox (WOC K 25794) this winter. The boat was originally powered by a Yanmar 1GM10 and I have been running a 15x10.5, two blade folder (propeller blade tip clearance about 1.6 inch).Particulars for the boat are: LOA = 29.36', LWL = 23.62', Beam = 9.32' , D...
|
Anders
|
2
|
2911
|
|
|
|
|
Got a new Beta 60
(Preview)
Hi there. Looks like I'm getting in on the ground floor. I've just taken possession of a Beta 60, and although I don't expect problems when I finally install it later this summer, I will enjoy reading the various tips and techniques I find here. Here's a picture: For more details, please see my blog at...
|
Alchemy
|
0
|
1223
|
|
|
|
|
New motor, new propeller
(Preview)
The Perkins 4-108, and the left hand propeller are being replaced by a Beta 43hp diesel on my Tayana 37. Do you have experience with the Campbell Sailor propeller. your comments would .be appreciated. Thanks in advance,
|
Charlie
|
2
|
1357
|
|
|
