Members Login
Username 
 
Password 
    Remember Me  
Beta Marine Repower Solutions -> Beta Marine Engines -> BV1505 Raw Water Pump remove, rebuild, replace
Post Info TOPIC: BV1505 Raw Water Pump remove, rebuild, replace
Betamarine38


Member

Status: Offline
Posts: 5
Date:
BV1505 Raw Water Pump remove, rebuild, replace
Permalink  

Good Day

 

removing sea water pump and would like some direction on the rebuild.  to note:  the O ring sealing the pump to the block was flattened and leaking.  Another small O ring took flight on removal and won't be found for a year or two. 

 

Is there a schematic for assembly of the pump internals as well as directions on how to porperly install and torque the pump bolts

 

 



__________________
Farron


Senior Member

Status: Offline
Posts: 198
Date:
Permalink  

Hello Betamarine38,

Please call the Beta office in NC at 252-249-2473. There have been a few different pumps used and we will need some more information from you to answer this question and provide the best answer. If you can provide the engine WOC number, or engine serial number, that will be extremely helpful.

__________________

Best regards,

Farron

Technical Sales and Service for Beta Marine, US Ltd. Minnesott Beach, NC   PH: 252-249-2473  farron@betamarineusa.com
Betamarine38


Member

Status: Offline
Posts: 5
Date:
Permalink  

I took your advice and purchased parts from NC. I'll complete the pump install tomorrow morning and test for leakage.

 

I have some detective work to do as the timing cover looks badly corroded.

 

Could it be that my problem wasn't the I ring but corrosion 

 

Also if my understanding is correct:  of the pump is in proper working order, there wouldn't be a water leak due to a bad O ring at the block but an oil leak.  If this is true, it points to corrosion being the issue

 

There is no water in the motor oil.  Cheers 

 

 



Attachments
__________________
Farron


Senior Member

Status: Offline
Posts: 198
Date:
Permalink  

Your old pump was leaking salt water and has corroded the front cover and the pump mount area. Clean up the corrosion with a metal brush and repaint. Then mount the pump using silicone between the pump and the mount surface in lieu of the standard o-ring.

__________________

Best regards,

Farron

Technical Sales and Service for Beta Marine, US Ltd. Minnesott Beach, NC   PH: 252-249-2473  farron@betamarineusa.com
Betamarine38


Member

Status: Offline
Posts: 5
Date:
Permalink  

What is the part number for that front cover?

__________________
Farron


Senior Member

Status: Offline
Posts: 198
Date:
Permalink  

You will have to call the Beta office with your WOC engine number or your engine serial number.

__________________

Best regards,

Farron

Technical Sales and Service for Beta Marine, US Ltd. Minnesott Beach, NC   PH: 252-249-2473  farron@betamarineusa.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Beta Marine Repower Solutions -> Beta Marine Engines -> BV1505 Raw Water Pump remove, rebuild, replace
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard