|
Oil pressure light on and beeping but good oil pressure
(Preview)
Hi folks I have a Beta50 that just started getting a oil pressure light and beeping. The oil pressure looks fine. 50 at rpm going down to 25 at lower rpm On the oil pressure gauge. I have 1100 hours so far on the engine and have been using it for a month 2 hours a day to charge our lithiums. Have a 175 amp alterna...
|
brak
|
0
|
305
|
|
|
|
Johnson F5B-9 raw water pump seal failure
(Preview)
So my Cambria 44 sailboat with a 2013 Beta 60 (work order K29378) was launched today in Antigua. For the third time in 6 years in the Caribbean the lip seals on the Johnson pump failed with only 700 hours total on the engine. While I now carry a spare Johnson raw water pump, it is still a huge pain to swa...
|
Cape Sailor
|
1
|
383
|
|
|
|
Water pump going into engine leaking
(Preview)
I have a 6 year old Beta 14. I see that I am getting some corrosion and salt buildup where the raw water pump enters the front of the engine (cam?). Should I assume I need bushing in the water pump and if so, wat do I need to order and how do I do it. I've replaced them in other Sherwood and Oberdorfer pumps on oth...
|
krivanj
|
0
|
335
|
|
|
|
TMC 40 engage delay
(Preview)
I have a BD722 with the TMC-40 transmission. 450 hours on engine and transmission.When shifting into forward after starting the engine cold, the transmission does not engage immediately. Sometimes slightly revving the engine will engage the transmission and sometimes it does not engage even wh...
|
staylor1946
|
4
|
6278
|
|
|
|
Transmission Replacement TMC40 P
(Preview)
Hey, I'm replacing my Transmission. It's slipping, or rather slow to engage in forward, I've checked the cable and adjusted it as much as I can, took it off and tested it by moving the lever myself, slow engagement is still there,...filled up the oil, slipping is still there...so going to replace the t...
|
SV Monsoon
|
0
|
299
|
|
|